Isolation Transformer construction is a little bit difficult to understand but not impossible. This article will help you better understand Isolation Transformer construction. Nowadays, an Isolation Transformer is a common device that transmits AC from one terminal to another terminal with the same voltage, current, and frequency level.
The two isolation transformers’ primary and secondary terminals winding turns number is the same. The technical construction of the isolation transformer is straightforward than other transformers. This blog explained the details of the structure of the isolation transformers on this website.
Isolation Transformer Construction Details
In the Isolation transformer, primary and secondary winding are not physically connected. It works on the principle of EMF (electromagnetic force) power. The isolation transformer minimizes extra voltage from the load side to the supplying side. The winding turns ratio of the isolation transformer is 1:1.
There have many structures of Isolation transformers as the purpose of works. Two winds divided by the shield. Primary winds are divided by a wrapped foil box shield, and secondary winds are divided by a Faraday shield. The wings are not connected with a wire. A magnetic field was created and transferred to the secondary load when primary wings were connected to the AC power generation source that follows an equation.
A metallic body carried the whole of the system. A line from the wrapped foil box shield and Faraday shield is connected to the ground. It is also called a natural phage connection. The whole of the system is given below with a picture.
Isolation transformer construction picture.
Isolation transformer brings a new era to the power generation system. Construction of the transformer is very efficient for the power transformation for multiple purposes.